Cisco DPC2434 User Manual page 55

3 Install the mounting screws into the wall; leave a gap of about 1/4-inch between
the screw head and the wall. Then, go to step 4.
4 Verify that no cables or wires are connected to the wireless home gateway.
5 Lift the wireless home gateway into position. Slip the large end of both mounting
slots (located in the back of the wireless home gateway) over the mounting
screws, and then slide the wireless home gateway down until the narrow end of
the keyhole slot contacts the screw shaft.
Important: Verify that the mounting screws securely support the wireless home
gateway before you release the unit.
4011350 Rev D
How Do I Mount the Modem on a Wall? (Optional)
55