Cisco DPC2434 User Manual page 138

Having Difficulty?
The modem does not register a cable connection
The modem works with a standard 75-ohm RF coaxial cable. If you are using a

different cable, your wireless home gateway will not function properly. Contact
your service provider to determine whether you are using the correct cable.
Verify that you have followed the procedures in How Do I Troubleshoot My

Internet Service Installation? (on page 37).
Your NIC card or USB interface may be malfunctioning. Refer to the

troubleshooting information in the NIC or USB documentation provided with
the device.
138 4011350 Rev D