Cisco DPC2434 User Manual page 101

Setup Firewall - Event Logging Page Description
The Setup Firewall - Event Logging page shows events captured by the firewall. The
log displays the following items:
Description of the event

Number of events that have occurred

Last occurrence of an event

Target and source addresses

You can configure the system to email log events to the administrator in order for
the administrator to monitor the firewall.
This section describes the section headings and fields descriptions of the Setup
Firewall - Event Logging page.
Field Name
Contact Email
Address
SMTP Server Name
E-mail Alerts
Description
Count
Last Occurrence
Target
Source
4011350 Rev D
Description
Allows you to enter the email address of the person who
monitors the firewall. When an event occurs, it will be
logged and an email will be sent to this address
automatically reporting the event.
Allows you to enter the mail server name of your outgoing
mail server, or the mail server of your Internet service
provider (ISP)
Allows you to enable or disable sending email alerts
Describes what event was detected by the gateway's firewall
Displays the number of times the event has been detected
Displays the time the last occurrence of this event was
detected
Displays the IP address of the device in your private local
network to which the event was directed along with the IP
port number targeted by the event
Displays the IP address of the Internet based source of the
event along with the IP port number used by that device
How Do I Configure the Wireless Home Gateway?
101