How Do I Set Up My High-Speed Internet Access Account - Cisco DPC2434 User Manual

How Do I Set Up My High-Speed Internet Access Account?

How Do I Set Up My High-Speed Internet Access Account?
Before you can use your wireless home gateway, you need to have a high-speed
Internet access account. If you do not have a high-speed Internet access account, you
need to set up an account with your local service provider. Choose one of the two
options in this section.
I Do Not Have a High-Speed Internet Access Account
If you do not have a high-speed Internet access account, your service provider will
set up your account and become your Internet Service Provider (ISP). Internet access
enables you to send and receive email, access the World Wide Web, and receive
other Internet services.
You will need to give your service provider the following information:
The serial number of the modem

The Media Access Control (MAC) address of the modem

These numbers appear on a bar code label located on the wireless home gateway.
The serial number consists of a series of alphanumeric characters preceded by S/N.
The MAC address consists of a series of alphanumeric characters preceded by CM
MAC. The following illustration shows a sample bar code label.
Write down these numbers in the space provided here.
Serial Number _______________________
MAC Address ________________________
I Already Have an Existing High-Speed Internet Access Account
If you have an existing high-speed Internet access account, you must give your
service provider the serial number and the MAC address of the wireless home
gateway. Refer to the serial number and MAC address information listed previously
in this section.
Note: You may not be able to continue to use your existing email account with your
wireless home gateway. Contact your service provider for more information.
22 4011350 Rev D