Cisco DPC2434 User Manual page 54

How Do I Mount the Modem on a Wall? (Optional)
Location and Dimensions of the Wall-Mounting Slots
The following illustration shows the location and dimensions of the wall-mounting
slots on the bottom of the modem. Use the information on this page as a guide for
mounting your modem to the wall.
Mounting the Wireless Home Gateway on a Wall
1 Using a drill with a 3/16-inch bit, drill two holes at the same height and 4 inches
apart.
Note: The preceding graphic illustrates the location of the mounting holes on the
back of the wireless home gateway.
2 Are you mounting the wireless home gateway into a drywall or concrete surface
where a wooden stud is available?
 If yes, go to step 3.
If no, drive the anchor bolts into the wall, and install the mounting screws

into the anchor bolts; leave a gap of about 1/4-inch between the screw head
and the wall. Then, go to step 4.
54 4011350 Rev D