Cisco DPC2434 User Manual page 74

How Do I Configure the Wireless Home Gateway?
Function Keys
Key
Add Static IP
Remove Static IP
Restarting the Gateway Modem
Use the Setup Basic Settings - Restart Cable Modem page to restart your cable
modem.
Click Restart Modem in the Basic Settings section of the Setup page to access the
Basic Settings - Restart Cable Modem page.
Click Reboot Cable Modem to restart the gateway modem.
Note: Restarting your gateway modem does not reset any of the settings.
Setup Basic Settings - Restart Cable Modem Page Example
The following illustration is an example of the Restart Cable Modem page.
74
Description
Adds the Static IP address to the list of assigned IP addresses
Removes the Static IP address from the list of assigned IP
addresses
4011350 Rev D