Fcc Compliance Statement - Epson PowerLite Presenter i/i+ User Manual

Powerlite presenter i/i+ home theater projector

Hide thumbs

Table Of Contents

Table of Contents

■

Don't place the projector where the cord can be walked on. This may result in fraying or

damage to the plug.

■

Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning.

Do not use liquid or aerosol cleaners.

The lamp(s) in this product contain mercury. Please consult your state and local

■

regulations regarding disposal or recycling. Do not put in the trash.

Allow the lamp to cool for one hour before replacing it.

■

Do not place anything that can become warped or damaged by heat near the exhaust

■

vents. Do not bring your hands or face close to the vents while projection is in progress.

Do not block the light coming out of the projector's lens with an object. This can cause

■

the object to melt or start a fire.

Unplug the projector during lightning storms or when not in use for extended periods.

■

Don't place the projector or remote control on top of heat-producing equipment.

■

If you use the projector in a country other than where you purchased it, use the correct

power cord for that country.

■

Don't stand on the projector or place heavy objects on it.

Don't use the projector outside of the required temperature range of 41 to 95 °F

■

(5 to 35 °C). Doing so may cause an unstable display and could lead to projector damage.

Don't store the projector outside of the required temperature range of 14 to 140 °F

■

(–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage

to the case.

WARNING: The cords included with this product contain chemicals, including lead, known

to the State of California to cause birth defects or other reproductive harm. Wash hands after

handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety

Code § 25249.5 and following.)