Epson PowerLite Presenter i/i+ User Manual page 60

Caution: Never touch the glass portion of the lamp with your bare hands; the invisible residue left
by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.
Follow these steps to replace the lamp:
1. If the projector is on, press the P power button and wait for the light to stop flashing and
the projector to beep twice.
2. Unplug the power cord and any cables.
3. If using an iPod, remove the device and close the dock.
4. Wait about an hour to make sure the lamp is no longer hot.
5. Use a screwdriver to loosen the lamp cover. Slide the cover away from the projector to
remove it.
6. Loosen the two screws securing the lamp.
Note: The screws don't come all the way out.
7. Grasp the lamp by the handle and pull it straight out.
WARNING:
local regulations regarding disposal or recycling. Do not put in the trash.
60
Maintenance
The lamp(s) in this product contain mercury. Please consult your state and