Table of Contents
Advertisement
Connecting an iPad
Before you connect an iPad to your projector, you can attach the included iPad bracket.
Follow these steps:
Caution: Do not remove the iPad bracket once attached. Removing the bracket weakens the
adhesive, making it unable to support the iPad if reattached.
1. Remove the protective case from your iPad, if necessary.
2. Use a clean dry lint-free cloth to wipe the surface of the projector where the iPad bracket
will be attached.
3. Remove the tape from the iPad bracket to expose the adhesive.
4. Attach the bracket as shown below.
20
Projecting from an iPod, iPhone, or iPad
Advertisement
Table of Contents
