Epson PowerLite Presenter i/i+ User Manual page 67

Only part of the picture is displayed, or the picture is distorted.
■
Press the
Aspect
■
Check the
Overscan
You're using a computer and no picture appears on the screen.
If you're using a Windows laptop:
1. Hold down the laptop's
. (See your laptop manual for details.) Wait a few seconds for an image to
CRT/LCD
appear.
2. To display both on the laptop's monitor and projector, try pressing the same keys again.
3. If the same image is not displayed by the laptop and projector, check the Windows
Display utility to make sure the external monitor port is enabled. (See your computer or
Windows manual for instructions.)
4. If necessary, check your video card settings and set the multiple display option to
If you're using Mac OS X:
1. Open the
System Preferences
2. Select the
VGA Display
3. Click the
Arrange
4. Check the
Mirror Displays
The picture is upside-down or reversed.
Change the
Projection
Note: You cannot change projection mode when an iPod is in the dock.
The picture isn't rectangular.
■
If the image looks like
screen and angled toward it. Use the horizontal keystone slider to correct the image. If
more correction is needed, move the projector so that it is nearly centered with the screen,
then use the horizontal keystone slider to adjust the image shape (see page 34).
■
If the image looks like
button to select a different aspect ratio (see page 37).
to make sure it's adjusted correctly (see page 45).
key and press the key labelled with a monitor icon or
Fn
utility and select
or
Color LCD
or tab.
Arrangement
checkbox.
setting in the Extended menu (see page 48).
or , the projector has been placed off to one side of the
or , make sure
.
Displays
option, if necessary.
Auto V-keystone
Clone
is turned on.
Problem Solving
.
67