Table of Contents
Advertisement
If the dirt is difficult to remove or the filter is broken, replace it. You can purchase air
filter part number V13H134A37 from an authorized EPSON reseller. To find the nearest
reseller, contact Epson as described on page 70.
8. Insert the air filter as shown until it clicks into place.
Replacing the lamp
The projection lamp lasts for up to 4000 hours (in Normal mode) or 5000 hours (in ECO
mode). You can use the
to replace the lamp when:
■
The following message appears: "It is time to replace your lamp. Please contact your
Epson projector reseller or visit www.epson.com to purchase."
■
The projected image gets darker or starts to deteriorate.
■
The projector's lamp light flashes orange and the
power button and
Note: Lamp life results will vary depending on mode selected,
environmental conditions, and usage.
Tip: Turn off this product when not in use to prolong the life of
the projector.
You can purchase lamp part number V13H010L67 from an authorized EPSON reseller. To
find the nearest reseller, contact Epson as described on page 70.
Warning: Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the
lamp has broken, small glass fragments may be present and should be removed carefully to avoid
injury.
menu to check how long it's been in use (see page 62). It's time
Info
power light flash.
P
Lamp
light
P
59
Maintenance
Advertisement
Table of Contents
