Adjusting Signal Settings - Epson PowerLite Presenter i/i+ User Manual

Adjusting signal settings

Although the projector normally detects and optimizes the input signal automatically, you
can use the Signal menu to make manual adjustments. In addition to changing the position of
the projected image, you can correct sync for computer images, or change the aspect ratio.
1. Press the
those below. (The settings will be different depending on the source you are projecting
from.)
Computer/RGB video
Composite video
2. Adjust the desired options as needed:
■ Resolution
Set to
signal. If necessary, select
images).
■ Noise Reduction
Reduces image flickering from progressive image signals. This setting can be set to
,
Off
■ Video Signal
Sets the video input signal. For a list of compatible video formats, see page 75.
44
Making detailed adjustments
button and select the
Menu
to have the projector automatically identify the resolution of the input
Auto
Wide
, and .
NR1 NR2
menu. You see a screen similar to one of
Signal
Component video
HDMI
(for widescreen images) or (for 4:3 ratio
Normal