Problem Solving; What To Do When The Lights Come On Or Flash - Epson PowerLite Presenter i/i+ User Manual

Problem Solving

This section explains how to interpret the projector's lights, solve problems with the picture
and remote control, and contact technical support.

What to do when the lights come on or flash

The lights on top of the projector indicate the
projector's status and let you know when a problem
occurs.
If the projector isn't working correctly, first press the
P power button, let the projector cool down, and
unplug the power cord. Then plug the power cord back
in and turn on the projector. If this doesn't solve the
problem, check the status lights on top of the projector.
Light status
All lights are off
Power button is on;
no other lights are
on
Power light flashes;
no other lights are
on
Power light is on
and the power
button is on
64
Problem Solving
Cause and solution
The projector is turned off. If necessary, connect the power
cord and press the P power button on the remote control or
projector. Also check to see if the Illumination setting is set to
Off. See page 48.
The projector is in standby mode. Unplug the projector to turn it
P
off, or press the power button to turn it on.
The projector is warming up. Wait for the picture to appear.
Or, the projector is cooling down. Wait until the light stops
flashing and turns off. The projector is now in standby mode.
Do not unplug the power cable while the projector is cooling
down. This may reduce the life span of the lamp.
Projection is in progress.
Status lights
Status lights