Table of Contents
Advertisement
7. When the message
the enter button. Saving the logo may take a few moments. Do not use your projector,
remote control, or video source while the logo is being saved.
8. When you see the message
Choosing when to display the image
After your image is saved, you can set it to display as the startup screen, the screen you see
when there's no signal, or the screen you see when you press the
remote control.
1. Press the
the enter button.
2. Select
Display
3. Choose from these display options:
■
Set
Display Background
■
Set
Startup Screen
■
Set
A/V mute
button.
4. When you're finished, press
Locking the projector
The projector includes two lock settings to prevent the image from being accidentally
changed once it's adjusted, and to keep children from turning on the projector without adult
supervision.
To access the lock settings, follow these steps:
1. Press the
2. Use the menu navigation buttons to open the
3. Choose from these options:
■ Child Lock
pressed for about 3 seconds. (You can use the Ppower button to turn it off,
however.) Since you can still use the remote control to turn on the projector, you
may want to keep it away from children's reach.
52
Making detailed adjustments
Save this image as the User's Logo?
Completed
button on the remote control, highlight the
Menu
and press the enter button.
to
On
to
to display your image when you press the
Logo
Menu
button on the remote control.
Menu
to disable the Ppower button on the projector's control panel unless it is
, press
Menu
to
to display your image when there is no signal.
Logo
to display your image when the projector is warming up.
to exit.
Settings
appears, select
to exit.
A/V mute button on the
menu, and press
Extended
A/V mute
menu.
and press
Yes
Advertisement
Table of Contents
