Table of Contents
Advertisement
16:10 aspect ratio (continued)
Diagonal image size
80 in.
(203.2 cm)
100 in.
(254 cm)
120 in.
(305 cm)
150 in.
(381 cm)
200 in.
(508 cm)
320 in.
(812.8 cm)
Installing the projector
To install the projector, you first need to determine the location, based on the size of your
screen (maximum diagonal image size). Use the tables on page 13 as a guide to positioning the
projector.
To suspend the projector from the ceiling, you will need the optional projector mount. See
page 10 for purchasing information. Follow the instructions included with the mount to
install the projector.
Warning: When installing or adjusting the ceiling mount, do not use adhesives to prevent the
screws from loosening and do not use any type of oil or lubricant. These may cause the projector
casing to crack and the projector may fall, causing serious injury and serious damage to the
projector.
Note: When the projector is mounted on the ceiling and the picture is inverted, the dock will not
function.
If you install the projector on the ceiling, you will need to invert the picture so that it appears
right side up. Follow these steps:
1. Turn on the projector.
2. Press the
button on the remote control.
Menu
3. Open the
Extended
Projection distance Offset
88.6 to 106.3 in.
(225 to 270 cm)
110.6 to 133.1 in.
(281 to 338 cm)
133.1 to 160.2 in.
(338 to 407 cm)
166.9 to 200.4 in.
(424 to 509 cm)
222.8 to 267.7 in.
(566 to 680 cm)
357.1 to 428.7 in.
(907 to 1089 cm)
menu, then select
Projection
3.9 in.
(10 cm)
4.7 in.
(12 cm)
5.5 in.
(14 cm)
7.1 in.
(18 cm)
9.4 in.
(24 cm)
15.4 in.
(39 cm)
.
Setting up the projector
15
Advertisement
Table of Contents
