Removing Your Ipod - Epson PowerLite Presenter i/i+ User Manual

Tip: If the iPod's battery is low, the Dock light may not turn on. Keep the device connected so it
will charge. Once the Dock light turns on, you can play back content.
Light
Note: When you turn off the connected device, the Dock light also turns off.

Removing your iPod

1. To remove the device, hold the dock with one hand and gently pull the device straight
up.
Note: It is safe to remove your device without turning it or the projector off first.
2. Close the dock by pushing it straight in until it clicks into place.
Caution: Always close the dock when not in use or before transporting the projector.
22
Projecting from an iPod, iPhone, or iPad
Status Condition
Light is on The device is connected and you can play back content on
your device.
Light is flashing There is a device connection error. Disconnect the device
and try connecting it again.