Table of Contents
Advertisement
Startup Screen:
projector is turned on.
A/V mute:
the
A/V mute
■ Closed Caption
Lets you display closed captioning for content that provides it. This feature is only
available with composite video sources (Presenter i+ only).
■ User's Logo
Create a custom startup screen, as described on page 51.
■ Projection
Select
Front
mounted upside-down from the ceiling),
screen), or
projector is mounted upside-down from the ceiling).
Note: When an iPod is docked, this setting is grayed out and locked to "Front". To change the
setting, first exit the menu and remove the iPod from the dock.
If you hold down the
projector switches between Front and Front/Ceiling or Rear and Rear/Ceiling.
■ Operation
Direct Power On:
power cord (without pressing the Ppower button).
Note: If Direct Power On is enabled, the power cord is connected, and a power outage occurs,
the projector will start when the power is restored.
Sleep Mode
for 5, 10, or 30 minutes (you can adjust the amount of time in the
menu).
Lens Cover Timer
when the A/V mute slide is closed for more than 30 minutes.
High Altitude Mode
meters) to ensure that the temperature is regulated properly. Turn this setting off for
lower elevations.
Note: Do not use the projector at altitudes above 7,500 feet (2,286 meters).
Illumination:
P power light. Use this setting if you find the lights distracting in a darkened room.
48
Making detailed adjustments
Enables or disables display of the startup (User's Logo) screen when the
Sets the screen background to
button is pressed.
(to project onto the front of a screen),
(to project from behind onto a transparent screen when the
Rear/Ceiling
A/V mute button on the remote control for about five seconds, the
Enable if you want the projector to turn on when you connect the
: Turns the projector off automatically if it is idle and no signal is received
: Enabled by default to turn the projector's power off automatically
: Enable when you are using the projector above 4,921 feet (1,500
Turn off this setting to deactivate the projector's Ppower button and
(default),
White
Black
Front/Ceiling
(to project from behind onto a transparent
Rear
,
, or
when
Blue
Logo
(when the projector is
setting
Sleep Mode
Advertisement
Table of Contents
