Table of Contents
Advertisement
Installation Guide
Installation Work Flow
Installing one projector
Follow the procedures below to mount the projector on a wall.
a
Installing the Setting Plate and the Projector (
b
Adjusting the Position of the Projector (
c
Calibrating the Interactive Pen (
d
Installing the Control Pad and the Pen Stand (
When installing the Touch Unit, finish installing the projector first, and then follow the procedures below.
The procedure differs depending on where the Touch Unit is to be installed.
When installing the Touch Unit outside the whiteboard (using the Touch Unit Bracket)
a
Installing the Touch Unit (
b
Adjusting the Angle of Laser Diffusion (
c
Performing Touch Calibration (
p.33)
s
p.46)
s
p.55)
s
p.62)
s
p.65)
s
p.71)
s
p.85)
s
11
Advertisement
Table of Contents
