Remote Start - Motorola MVME6100 Installation And Use Manual

Remote Start

As described in the MOTLoad Firmware Package User's Manual, listed in
Appendix C, Related
information about the target board, download code and/or data, modify
memory on the target, and execute a downloaded program. These
transactions occur across the VMEbus in the case of the MVME6100.
MOTLoad uses one of four mailboxes in the Tsi148 VME controller as the
inter-board communication address (IBCA) between the host and the
target.
CR/CSR slave addresses configured by MOTLoad are assigned according
to the installation slot in the backplane, as indicated by the VME64
Specification. For reference, the following values are provided:
For further details on CR/CSR space, please refer to the VME64
Specification, listed in
The MVME6100 uses a Discovery II for its VME bridge. The offsets of the
mailboxes in the Discovery II are defined in the Discovery II User Manual,
http://www.motorola.com/computer/literature
Documentation, remote start allows the user to obtain
Slot Position CS/CSR Starting Address
1
2
3
4
5
6
7
8
9
A
B
C
Appendix C, Related
Remote Start
0x0008.0000
0x0010.0000
0x0018.0000
0x0020.0000
0x0028.0000
0x0030.0000
0x0038.0000
0x0040.0000
0x0048.0000
0x0050.0000
0x0058.0000
0x0060.0000
Documentation.
3
3-19