Ricoh Aficio MP 2510 Operating Instructions Manual page 113

❖ ECM (Error Correction Mode)
If part of a transmission fails because of a line problem, the lost data is auto-
matically resent. For this function to work, the other machine must have
ECM. You can turn this function on or off through the following procedure.
This function is not available with Internet Fax.
If you turn ECM off, you cannot use the following functions:
• JBIG Transmission
• Super G3 Communication
The default setting is On.
❖ Parameter Setting
User Parameters allow you to customize various settings to suit your needs.
For details about Parameter Setting, see "Parameter Settings".
❖ Program Special Sender
By programming particular receivers as Special Sender in advance, you can
have Special Senders treated differently.
For details about how to program Special Sender, see "Special Senders to
Treat Differently".
❖ Box Setting
The following functions are for delivery and transfer of documents:
• Personal Box
• Information Box
• Transfer Box
For details about Box Setting, see "Box Settings".
❖ Transfer Report
For the Requesting Party to be able to receive Transfer Result Reports from
the Transfer Station, the Requesting Party must program the number of the
telephone line that is connected to their own machine.
Be sure to insert a pause after the area code.
For example, if you are in the United States and your fax number is 1212-
1234567, program the following:
• 1212-1234567
You can program the fax number for the G3 line.
You cannot program or edit a Transfer Report when using a line (during com-
munication). Program or edit after communication.
You cannot use Transfer Request if the telephone number of their machine is
not programmed into that machine.
Up to 16 digits are available for G3.
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [Transfer Report].
Administrator Tools
105
4