Ricoh Aficio MP 2510 Operating Instructions Manual page 215

L
Specify optional settings such as "SUB Code", "SEP Code", and "Protocol".
M
Press [OK].
Note
❒ To register the name, see "Registering Names".
Reference
p.186 "Registering Names"
p.207 "Using the IP–Fax Destination as the sender"
p.207 "Selecting the protocol"
p.207 "Programming the SUB Code"
p.208 "Programming the SEP Code"
"Entering Text", About This Machine
Using the IP–Fax Destination as the sender
This section describes how to use the IP-Fax destination as the sender.
A
Press [Protection].
B
Press [Sender] under Use Name as.
Selecting the protocol
This section describes how to select the protocol.
A
Select [H.323] or [SIP].
B
Press [OK].
Programming the SUB Code
This section describes how to program the SUB Code.
A
Press [Adv. Features], and then press [SUB Code].
B
Press [Change] under TX SUB Code.
C
Enter the SUB Code, and then press [OK].
D
To enter a password, press [Change] under Password (SID).
E
Enter a password using the number keys, and then press [OK].
F
Press [OK].
Fax Destination
7
207