Ricoh Aficio MP 2510 Operating Instructions Manual page 28

Connecting the Machine
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Effective].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
1
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ When POP before SMTP is set to [On], you must also make settings for Recep-
tion Protocol and POP3 / IMAP4 Settings.
❒ When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.47 "Interface Settings"
p.53 "File Transfer"
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending e-mail with an IEEE 802.11b
(wireless LAN) connection.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/Network IP Address
Interface Settings/Network Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network LAN Type
Interface Settings/Network NCP Delivery Protocol
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL/TLS Communication
Interface Settings/Network Host Name
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
20
User Tool
Communication Mode
SSID Setting
Channel
Setting Requirements
Necessary
Necessary
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
As required
Necessary
As required
As required