Settings Required To Use The Network Delivery Scanner - Ricoh Aficio MP 2510 Operating Instructions Manual

Connecting the Machine

Settings Required to Use the Network Delivery Scanner

This section lists the settings required for delivering data to network.
1
Ethernet
This section lists the settings required for delivering data to network with an
Ethernet connection.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/Network IP Address
Interface Settings/Network Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network Ethernet Speed
Interface Settings/Network LAN Type
Interface Settings/Network NCP Delivery Protocol
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL/TLS Communication
Interface Settings/Network Host Name
File Transfer
File Transfer
File Transfer
File Transfer
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Effective].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
❒ If Delivery Option is set to [On], check that IP Address is specified.
Reference
p.47 "Interface Settings"
p.53 "File Transfer"
24
User Tool
Delivery Option
Fax RX File Transmission
Scanner Recall Interval Time
Number of Scanner Recalls
Setting Requirements
Necessary
As required
As required
As required
As required
As required
Necessary
As required
Necessary
As required
As required
As required
As required
As required
As required
As required
As required