User Stamp - Ricoh Aficio MP 2510 Operating Instructions Manual

❖ Stamp Format
You can adjust the stamp's size, density, and print page.
• Size
You can set the size of the stamp.
The default setting is 1X.
• Density
You can set the pattern used to print the stamp.
The default setting is Normal.
Normal: The stamp is printed on the image. You cannot check which parts
will overlap.
Lighter: The image can be seen through the stamp.
Lightest: You can see the image even clearer than in the Lighter setting.
• Page to Stamp
You can have the stamp printed on the first page or all pages.
The default setting is All Pages.
Reference
"Preset Stamp", Copy/ Document Server Reference

User Stamp

This section describes the user tools in the User Stamp menu under Stamp.
❖ Program / Delete Stamp
You can register, change, or delete user stamps.
You can register up to four custom stamps with your favourite designs.
❖ Stamp Position 1-4
Specify position where the stamp is printed.
Press the arrow keys to adjust the position.
The default setting for "Position" is Top Right.
The default setting for "Top Margin" is 24 mm (Metric version) / 1.0" (Inch
version).
The default setting for "Right Margin" is 24 mm (Metric version) / 1.0" (Inch
version).
❖ Stamp Format 1-4
You can adjust the print page for User Stamps 1 to 4 already registered.
• Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
The default setting is All Pages.
Reference
"User Stamp", Copy/Document Server Reference
Stamp
3
85