Output Tray Settings - Ricoh Aficio MP 2510 Operating Instructions Manual

❖ <F/F4>Size Setting
Currently three types of F size are available; 8
8"×13"L. The ADF or exposure glass cover sensor cannot distinguish these
three types of originals. This function sets the F size from the ADF or expo-
sure glass cover sensor. Auto Paper Select or Auto Reduce/Enlarge can be
used for F size originals based on this setting.
The default setting is 8
Reference
p.3 "Accessing User Tools"
"Function Compatibility", Copy/Document Server Reference

Output tray settings

Important
❒ You cannot interrupt the current job with a different function job that speci-
fies stapling or sorting.
❒ You can interrupt the current job with an ordinary copy job or facsimile re-
ception. The output tray used when the job is interrupted varies depending
on the type of finisher shift tray and output tray specified for interruption.
❖ When 500–sheet finisher is the finisher shift tray:
• When the output tray specified for the interrupting job is the finisher tray,
the interrupting job will be delivered to internal tray 1.
• When the output tray specified for the interrupting job is not the finisher
tray, the interrupting job will be delivered to the specified output tray.
❖ When 1000–sheet finisher is the finisher shift tray:
• When the output tray specified for the interrupting job is the finisher tray,
the interrupting job will be delivered to the finisher upper tray.
• When the output tray specified for the interrupting job is not the finisher
tray, the interrupting job will be delivered to the specified output tray.
When the 500–sheet finisher or 1000–sheet finisher is installed and stapling is
specified for a job, the job will be delivered to the finisher shift tray, regardless
of the output tray specified.
1
/ "×13"L.
2
General Features
1 1
/ "×13"L, 8 / "×13"L and
2 4
2
41