Deleting A User Code - Ricoh Aficio MP 2510 Operating Instructions Manual

J
To change the available functions, press [Auth. Info] and then press [TNext]
twice.
K
Press the key to select the functions to enable them.
Press the key to highlight it, and then the function is enabled. To cancel a se-
lection, press the highlighted key.
L
Press [OK].
M
Press [Exit].
N
Press the {User Tools/Counter} key.
Note
❒ To change the name, key display and title, see "Changing a Registered
Name".
Reference
p.188 "Changing a Registered Name"

Deleting a User Code

This section describes how to delete registered user code.
Important
❒ After clearing the user code, the counter is automatically cleared.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [TNext].
D
Press [Address Book Management].
E
Check that [Program / Change] is selected.
F
Select the name whose code is to be deleted.
Press the name key, or enter the registered number using the number keys.
If you press , you can search by the registered name, user code, fax number,
folder name, e-mail address, or IP-Fax destination.
G
Press [Auth. Info].
Authentication Information
7
193