Fuse & Diagnostics Connector - Cannondale ATV Owner's Manual

FUSE & DIAGNOSTICS CONNECTOR
The main electrical fuse is located in the area under the
left front fender. Always replace the fuse with one of the
specified rating. See "Fuse" starting on page 130. A special
diagnostic tool connector is also located in the same area.
The connector type is different for MC500 and MC1000
equipped models. See the photos. The diagnostic tools can
be used to diagnose faults with the engine management
system as well as other functions.
1. Fuse (in holder)
2. MC500 Data port
34
1. Fuse (in holder)
2. MC1000 Data port
NOTE :
For information on special tools developed to service
your ATV, contact an
motorsports dealer.
authorized Cannondale