Adjusting the front shocks
Front spring pre-load Type I
The spring adjusting sleeve has five positions so that the
spring can be adjusted for different riding conditions. To
adjust the preload turn the adjusting sleeve with a spanner
wrench. The photo below shows a shock with settings 1-5.
1 1
2
3
1. Adjusting sleeve
2. Turn with a spanner wrench
5
4
Front spring pre-load Type II
The spring adjusting sleeve has three positions so that
the spring can be adjusted for different riding conditions.
Adjust the spring preload using two spanner wrenches
turning in opposite directions.
(1)
1. Minimum (softer)
2. Middle (factory preset)
3. Maximum (harder)
(2)
(3)
143