Cowl
NOTE :
The Engine Control Unit (ECU) and air filter are located
under the cowl.
1. To remove the cowl and the seat
2. Remove the fender support bracket bolts at the frame.
76
3. Loosen and remove the cowl mounting bolts.
4. Lift the outer fender edges of the cowl - spreading them
out slightly - and move the cowl forward off the frame
making sure that the fender support braces clear the
frame and shock structure.
5. Remove the fuel cap and lift off the center piece. Return
the fuel cap.
6. To install, place the panel in the original position and
install the bolts and tighten to the specified torque.