Storage - Cannondale ATV Owner's Manual

STORAGE

When the vehicle will not be operated for an extended
period of time (e.g., winter months, 45 days or more), it is
necessary to perform certain procedures to guard against
deterioration and to make sure it is in perfect running
condition when the riding season begins.
1. Change the engine and transmission oils and clean the
filters.
2. Perform all necessary repairs.
3. Either drain the fuel tank completely or fill it with fresh
fuel. Add a good quality fuel stabilizer directly to the
tank. Fuel stabilizer can be purchased at most
automotive parts or large department stores. Make
sure you follow the directions on the product label.
4. Remove the air filter and thoroughly clean the area
surrounding the airbox.
5. Start the engine. With the engine idling spray (for 10 -
20 seconds) a high-quality engine fogging oil into the
airbox base plate directing the spray toward the intake
funnel inside the airbox.
6. Shut off the engine and allow to cool.
7. Clean, re-oil and install the air filter.
8. Plug the hole in the muffler with a clean shop towel and
cover the towel with a clean plastic bag. Secure the bag
with a rubber band.
9. Thoroughly clean and dry the vehicle.
10. Remove the battery and store it where it will not be
exposed to direct sunlight a clean, dry area.
11. Position the vehicle on a level surface and block the
wheels to prevent the wheels from moving.
12. Remove the ignition key.
153