Cannondale ATV Owner's Manual page 104

fluid level should be above the 'LOWER' mark. Add if
necessary.
REAR
1. UPPER mark
2. LOWER mark
2. To add, clean the cap and surrounding area thoroughly
before opening. Pour the specified brake fluid from a
clean container until it reaches the 'UPPER' mark.
Reinstall the diaphragm, insert, and cap.
3. Be sure to check for proper brake operation before
riding the vehicle.
102
Brake pads and discs, inspection
NOTE :
Consult the Model Specifications section in this
Owner's Manual for brake pad and disc wear
specifications.
Consult the Torque Table, for torque values.
1. Inspect the brake pads wear limit indicators on each
(1)
pad before every ride. When the friction material wears
to these indicators, have the brake pads replaced.
(2)
This illustration shows where on the brake pads to look for
the pad wear indication limits.