Drive - Cannondale ATV Owner's Manual

adjuster locknut. Turn the adjuster until the actuating
arm is in the specified position. Tighten the adjuster
locknut when completed.
(1)
1. Clutch release collar
2. Adjuster
3. Locknut
9. Reinstall the clutch cover and shift lever.
10. Reconnect the clutch cable end into the clutch arm.
11. Now, adjust the clutch lever freeplay. When you are
finished adjusting the cable freeplay, reinspect the arm
position to make sure you did not change the specified
arm position.
116
(2)
(3)

DRIVE

Drive chain lubrication
The drive chain must be cleaned and lubricated before
every ride. Significant forces act on the chain during
operation. If its not clean and lubricated, it can quickly
wear-out and possibly fail or contribute to un-safe
operating conditions.
CAUTION
The O-rings of the drive chain can be damaged by
steam or high pressure washers.
Never clean the chain with gasoline or other
solvents.
Do not use motor oils or grease to lubricate the
drive chain. Use only lubricants approved for
O-ring type chains.
Lubricate the drive chain after riding in wet or dusty
conditions or if the chain appears dry.