Cannondale ATV Owner's Manual page 29

WARNING
POTENTIAL HAZARD(S)
(1) ATV rolling away
(2) Riding with the parking brake applied
WHAT CAN HAPPEN
(1) A potential decline in fluid pressure can
decrease the applied braking force allowing the
ATV to begin to roll.
(2) Brake system will overheat, cause premature
wear, and damage to the brake pads. This can
result in a loss of brake function.
In either case above, severe injury or death can
result to the owner or bystanders.
HOW TO AVOID THE HAZARD
(1) Always block or chock the wheels on your ATV
immediately after applying the parking brake.
Never apply the parking brake and leave the
vehicle unattended.
Always choose firm level ground on which to park
your ATV.
(2) Release the parking brake before you ride.
1. To apply, pull the front brake lever against the handle
grip and hold it. Press and hold the locking button with
your index finger until it is fully depressed - release the
lever and remove your index finger from the button.
2. To disengage the parking brake, press down on the rear
brake pedal with your foot. Then, pull the front brake
lever against the handle grip; the locking mechanism
will automatically disengage (pop up).
3. Release the front brake lever slowly.
27