Cannondale ATV Owner's Manual page 134

Lighting
NOTE :
Always wipe off a newly installed bulb with alcohol-
dampened clean cloth or tissue. Oils from your fingers
can cause premature bulb failure.
Headlight bulb replacement
1. Remove the headlight cover (left or right).
2. Disconnect the headlight harness connector.
3. Turn the bulb unit counterclockwise to remove it from
the headlight housing.
4. Install a new bulb unit into the housing.
132
5. Reconnect the harness.
6. Test for proper operation.
Taillight bulb replacement
Turn the bulb mount counterclockwise and remove it
from the housing.
1. Pull the bulb out from mount and install a new bulb.
1
2
1. Bulb mount
2. Bulb
2. Reinstall the mount into the taillight housing.
3. Test for proper operation.