3. When lowering the brake pedal, make sure the
clearance (a) between the lower end of the pushrod
and the brake pedal is within specification. When
raising the brake pedal, ensure that at least two
pushrod threads are visible inside the pedal joint.
1
a
4
2
1. Pushrod
2. Brake pedal
3. Pushrod thread
4. Pedal joint
a. Clearance
1
4
3
2
CLUTCH
Clutch lever (manual) freeplay
NOTE :
Adjust at the lever first. If the specified freeplay cannot
be achieved, adjust at the inline adjuster. Inspect the
clutch arm position anytime the lever freeplay is
adjusted.
1. To measure the freeplay, slide back the protective boot,
gently pull in the clutch lever until the cable slack is
taken up, then measure the gap between the lever and
the clutch lever mounting bracket.
(2)
(1)
(-)
(+)
(a)
1. Adjuster
2. Lock ring
a. Freeplay
109