Appendix D - Upgrading The Modem's Firmware - Multitech MultiModem DID MT5634ZBA-DID User Manual

MultiModemDID User Guide
Appendix D - Upgrading the Modem's
Upgrade Overview
1. Identify your modem's model number and firmware version.
2. Identify the current version of the firmware at the Multi-Tech Web site. If your modem already has
current firmware, there is no need to install it.
3. Download the upgrade file and the appropriate Flash Wizard for your modem.
4. Install the Flash Wizard and extract the firmware .HEX file from you the file you downloaded.
4. If the firmware version number matches the firmware version number found in "Step 1: Identify
the Modem Firmware," you have the current firmware version and do not need to be update.
5. Document and clear your stored parameters.
6. Upgrade the firmware using the .HEX file and the Flash Wizard.
7. Restore your parameters.
Step 1: Identify Your Modem's Number and Firmware
You must know the model number and firmware version of your Mult-Tech modem to know whether
or not you should update it.
1. Run your favorite terminal program. If you are using Windows 95 or above, you can use
Windows Hyperterminal.
2. In the program's terminal window, type AT&F. Even if you cannot see the AT&F command on
your screen, be sure to type it completely, and then press Enter. If the modem does not respond
with OK, repeat the AT&F command.
3. Now type ATI, press Enter. The model number and firware version should appear. Record these
results.
Step 2: Indentify the Current Firware Version
1. Using your favorite Web browser, go to http://www.multitech.com/support/MultiModemZBA/
firmware.asp
2. Scroll down to your modem model number.
3. Look at the firmware version number for your modem.
4. If the firmware version number matches the firmware version number found in Step 1, you have
the current firmware version and do not need to update.
5. If the firmware version is greater than the one found in Step 1, your modem has an older version
of firmware. Continue with Step 6.
Warning: The first digit of the new firmware must match the first digit of the old firmware or the
modem may not work properly. If your current version is 4.16, replace it only with 4.xx, not 6.xx.
Step 3: Download the Upgrade File
1. If you are not already at the MultiModemZBA Firmware page of the Multi-Tech Web site, follow
the procedure in "Step 2: Identify the Current Firmware."
2. Download the upgrade file for your modem by clicking its name, and save the file in a temporary
folder on your hard disk.
3. In the same section of the Web page, click the Flash Wizard utility for your operating system to
download it, and save it in the same folder.
Appendix D – Upgrading the Modem's Firmware
Firmware
.
52