For Print Server Mode With Netware 4.X Bindery Emulation - Oce cm4521 User Manual

3
7
In the NetWare Settings screen, touch [User Authentication Setting
(NDS)], and then specify settings for the following. After specifying the
settings, touch [Close].
– User Authentication Setting (NDS): Select [ON]. (Depending on the
network environment, select [OFF].)
8
In the NetWare Settings screen, touch [Close].
9
Restart this machine (turn the main power off, then on again).
10
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as "Waiting for Job" for
the connected printer (0).
Reminder
When turning the power off, then on again, wait at least 10 seconds be-
fore turning the power on again; otherwise, this machine may not function
properly.

For Print Server mode with NetWare 4.x bindery emulation

Note
Before using bindery emulation, check that bindery emulation is compat-
ible with the NetWare server.
1
From a client computer, log on with Supervisor permissions to access
the NetWare server where the PServer is registered.
2
Start up Pconsole.
3-22
Setting up network printing
cm4521