Setting up network printing
3.8
Printing with NetWare
The printer controller supports the following environments.
Network printing in a NetWare environment
NetWare version
NetWare 4.x
NetWare 5.x/6
For Remote Printer mode with NetWare 4.x bindery emulation
Note
Before using bindery emulation, check that bindery emulation is compat-
ible with the NetWare server.
1
From a client computer, log on with Supervisor permissions to access
the NetWare server where the PServer is registered.
2
Start up Pconsole.
3
From the "Available Options" list, select "Quick Setup", and then click
the [Enter] button.
4
Enter the appropriate names in the "Printer Server Name", "Printer
Name", "Print Queue Name", and "Print Queue Volume" fields, select
"Other/Unknown" from the "Printer type" field, and then save the spec-
ified settings.
5
Click the [Esc] button to quit Pconsole.
6
Use the NetWare server console to load PSERVER.NLM.
!
Detail
For queue user privileges, printer notification options, assignment of mul-
tiple queues, and passwords, refer to the NetWare documentation, and
specify the settings as necessary.
Next, specify the NetWare settings for this machine as described below.
cm4521
Protocol used
Emulation
IPX
NDS/Bindery
IPX
NDS
TCP/IP
NDPS (lpr)
3
Service mode
PServer/Nprinter
PServer
3-19