For Print Server Mode With Netware 4.X Bindery Emulation - Oce VarioLink 2221 User Manual

Setting up network printing
8
Restart this machine (turn the main power off, then on again).
9
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as "Waiting for Job" for
the connected printer (0).
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The
machine may not operate correctly if it is turned on immediately after
being turned off.

For Print Server mode with NetWare 4.x bindery emulation

Before using bindery emulation, check that bindery emulation is compatible
with the NetWare server.
1
From a client computer, log on with Supervisor permissions to access
the NetWare server where the Pserver is registered.
2
Start up Pconsole.
3
From the "Available Options" list, select "Quick Setup", and then click
the [Enter] button.
4
Enter the appropriate names in the "Printer Server Name", "Printer
Name", "Print Queue Name", and "Print Queue Volume" fields, select
"Other/Unknown" from the "Printer type" field, and then save the
specified settings.
5
Click the [Esc] button to quit Pconsole.
VarioLink 2221/2821/3621
4
4-25