Specifying The User Authentication Settings - Oce cm4521 User Manual

Setting up the fax driver (Windows)

Specifying the user authentication settings

If the user authentication settings have been specified on this machine, you
must enter a user name and password.
Reminder
If a fax is sent using a user name or password that is not a registered ac-
count on this machine, or if a fax is sent without selecting a user under
"User Authentication", the operation is not authenticated by this machine
and the job is canceled.
If the user authentication settings are specified on this machine and the
authentication operation restriction function is in mode 2, the applicable
user is locked and cannot be accessed if the authentication information
is not entered correctly.
If the user authentication settings are not specified on the Configure tab,
user authentication cannot be performed. If using the user authentication
function, be sure to specify the settings on the Configure tab. For details,
refer to "Specifying the Configure tab settings" on page 9-26.
1
Click the Basic tab.
2
Click the [Authentication/Account Track] button.
3
Select "Recipient User", and then enter the user name and password.
cm4521
9
9-19