I/F Timeout - Oce cm4521 User Manual

10

I/F Timeout

You can set the time until a communication timeout occurs for the USB or
network interface. (Default setting: 60 sec.)
!
Detail
To display the Administrator Settings screen, refer to "To display the Ad-
ministrator Settings screen" on page 10-30.
1
In the Administrator Settings screen, touch [7 Printer Settings].
2
In the Printer Settings screen, touch the button of the desired interface
setting.
3
Press the [C] (clear) key to erase the value, and then use the keypad to
type in the default length of time (between 10 and 1000 seconds).
– If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
10-38
Various settings
cm4521