Setting Up the PS Visual Driver (Windows)
Bitmap Compression
Set whether or not to use the Bitmap compression. Using this function when
much image data should be printed, the printing speed may be improved.
1
Click the PostScript tab.
2
Select [RLE], [LZW] or [JPEG] from the [Compress Bitmap] pull down
list in the setting.
–
If you select [JPEG], then you can select the JPEG compression
type from the [JPEG] pull down list.
Using Tokenised PS
Set whether or not to use Tokenised PS.
1
Click the PostScript tab.
2
If you use the Tokenised PS, select the [Tokenised PS] checkbox in the
setting.
Setting the Output Protocol
Set the output protocol as follows.
1
Click the PostScript tab.
2
Select [Pure Binary] or [ASCII] from the [Output Protocol] pull down list
in the setting.
Setting the Gamma
Set the gamma correction value as follows.
1
Click the PostScript tab.
2
Set the gamma correction value from the [Gamma Level] pull down list
in the setting.
–
Setting range is 0.000 - 2.000.
75/60BW-1
6
6-39