Selecting The Paper Source - Oce im7520 User Manual

Setting Up the PCL Driver

Selecting the Paper Source

Paper source can be changed or paper type can be set as follows.
1
Click the Setup tab.
2
Select a paper source to be used with [Paper Source].
– Follow the procedure below to set the paper type for the "Paper
source".
– When using Transparency Interleave, refer to p. 5-10.
3
Click the [Paper Type Settings].
4
Select the "Paper Source" being changed, and then click the [Edit Pa-
per Type].
75/60BW-1
5
5-8