Setting Up the PPD Driver (Mac OS X)
Setup
You can specify the cover settings.
1
From the [File] menu, select [Print].
2
Select [Setup].
3
Specify settings for the following:
Paper Type
Front Cover Page
Paper Tray (Front Cover Page)
Back Cover Page
Paper Tray (Back Cover Page)
PI Front Cover
PI Back Cover
Transparency Interleave
Paper Tray (Transparency Inter-
leave)
75/60BW-1
Selects the paper type.
Attaches a front cover page.
Selects the input tray for the front cover.
Attaches a back cover page.
Selects the input tray for the back cover.
Set when the front cover is thick paper different from
other output paper.
Set when the back cover is thick paper different from
other output paper.
Inserts interleaves between overhead projector trans-
parencies.
Selects the input tray for the transparency interleaves.
9
9-15