Setting Up Network Printing
3.7
Printing With NetWare
The print controller supports the following environments.
Network Printing in a NetWare Environment
NetWare Version
NetWare 4.x
NetWare 5.x/6
Note
Before using bindery emulation, check that bindery emulation is compat-
ible with the NetWare server.
For Remote Printer Mode With NetWare 4.x Bindery Emulation
1
From a client computer, log on with Supervisor permissions to access
the NetWare server where the Pserver is registered.
2
Start up Pconsole.
3
From the [Available Options] list, select [Quick Setup], and then click
the [Enter].
4
Enter the appropriate names in the "Printer Server Name", "Printer
Name", "Print Queue Name", and "Print Queue Volume" fields, select
[Other/Unknown] from the [Printer type] field, and then save the speci-
fied settings.
5
Click the [Esc] to quit Pconsole.
6
Use the NetWare server console to load PSERVER.NLM.
–
For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documenta-
tion, and specify settings as necessary.
75/60BW-1
Protocol Used
Emulation
IPX
NDS/Bindery
IPX
NDS
TCP/IP
NDPS(lpr)
3
Service Mode
Pserver/Nprinter
Pserver
3-17