Adjusting The Printing Position (Image Shift) - Oce im7520 User Manual

Setting Up the PCL Driver

Adjusting the printing position (image shift)

You can adjust the printing position on the output paper. It is also possible
to use the printing position that has been adjusted with this machine.
1
Click the Special Functions tab.
2
Select the [Image Shift] check box.
3
Click the [Settings].
4
Specify the [Switch Setup], set the up/down/left/right shift on the front
and back sides or shift of paper interval in the unit of 0.1mm.
Note
The setting of [Page Interval] is the same at all times on the Front Side
and the Back Side. Be sure to set it on the Front Side.
By selecting the [Back Side Auto Setup] check box, the setting becomes
the same as that on the front side.
75/60BW-1
5
5-33