Adjusting The Printing Position (Image Shift) - Oce im7520 User Manual

Setting Up the PS Visual Driver (Windows)

Adjusting the Printing Position (Image Shift)

Printing position on the output paper can be adjusted as follows. It is also
possible to use the printing position that has been adjusted with this ma-
chine.
1
Click the Special Functions tab.
2
Select the [Image Shift] check box.
3
Click [Settings].
4
Specify the [Switch Setup], set the up/down/right/left shift of Front
Side/Back Side and set the shift of page interval in the unit of "0.1mm".
Note
The setting of [Page Interval] is the same at all times on the Front Side
and the Back Side. Be sure to set it on the Front Side.
Select the [Back Side Auto Setup] check box. Then the back side can be
set in the same way as on the front side.
75/60BW-1
6
6-37