Routine Maintenance - Oce Arizona 350 User Manual

Routine Maintenance

The Océ Arizona 350 GT printer requires daily, weekly, and monthly
maintenance as stated in the Océ user manual. The daily maintenance
includes cleaning the print heads and underneath the carriage. The weekly
maintenance includes swabbing the print heads and cleaning the UV lamp
filter so it's free from dust and dirt. Every month you should refill the coolant,
clean the gantry rails, and empty the waste container, if needed. Lastly you
should replace the UV lamp after every 500 hours of operations.
The print heads are cleaned by a suction head located in the maintenance
station, and the process is detailed in the user manual.
Any excessive ink should be cleaned from the print heads.
To keep the carriage underside clean, you should wipe it with a clean
polyester wipe cloth.
Wipe the print head with a clean polyester wipe cloth.
Copyright © 2008 BERTL, Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
WideFormat
March 8, 2009
Océ Arizona 350 GT Printer
www.bertl.com
Even after extensive use we didn't have a
need for emptying the waste container. If
needed, you open the waste valve and
dump the excessive ink into an empty
container for later disposal in a suitable
manner.
The waste toner valve allows you to dump
waste ink into a container.
What you need to do most often is to
replace the ink bags. The ink has a useful
lifetime of one year, and the system will
automatically detect and warn you about
any expired ink, which is a very useful
feature to prevent you from using expired
ink and getting a less than ideal print as a
result.
Open the clear plastic door on the
Ink Station.
Identify the ink
replaced.
Press the quick-release coupler
button at the bottom corner of the
ink bag.
Unhook the bag from the top of
the ink station.
Replace with a new ink bag of the
same color.
Push the quick-release coupler at
the bottom corner of the new bag
into place.
March 8, 2009
bag to be
Page 28