Output Finish - Oce Arizona 350 User Manual

Media Handling: Output/Finish
The Océ Arizona 350 GT printer has no output handling for rigid flatbed prints.
For roll feed media, the output rolls up on the take-up reel located above the
media. Also for roll feed media there is a cutting guide slot to enable the user
to manually cut roll media in a perfectly straight manner while viewing the
finished print.
Media Handling: Output/Finishing Features Summary
Maximum Output Capacity
Standard Output Capacity
Width Detection
Output Face Down
Output Face Up
Folding Options
Copyright © 2008 BERTL, Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
WideFormat
Not applicable
Not applicable
No
No
Yes
No
March 8, 2009
Océ Arizona 350 GT Printer
www.bertl.com
WHAT WE LIKED
•
There is easy access to both the
printed roll output and the rigid media
on the flatbed table.
WHAT WE WOULD LIKE TO SEE
•
BERTL does not
recommendations at this time.
March 8, 2009
have any
Page 27