Oce Arizona 350 User Manual page 20

WideFormat
Copyright © 2008 BERTL, Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
March 8, 2009
Océ Arizona 350 GT Printer
www.bertl.com
BERTL's test pattern
resolution consists of
horizontal and vertical lines positioned
with less and less spacing in between,
demanding higher optical
resolution to be able to distinguish them.
The line pairs per inch are printed in
CMYcolors. Most printers support a
certain optical resolution; however when
the bleeding or half toning between lines
gets increasingly smaller, the effective
resolution becomes something less than
the optical resolution.
We ran the test in Ocè's three standard
quality print modes: Fine Art, Quality, and
Production.
Our test with the Océ Arizona 350 GT
printer revealed that 112 line pairs were
detectable in both Quality and Fine Art
mode and 74 line pairs in Production
mode.
We therefore conclude that for quality
prints, the Quality mode is sufficient and
can be used instead of Fine Art mode to
speed up production.
Overall the result is good and meets our
expectations.
March 8, 2009
for printing
a series of
printing
Page 20